Paint Correction

Auto paint correction is machine polishing that levels your car’s clear coat to remove swirl marks, wash scratches, holograms and oxidation. It takes the damage out. Wax and glaze only fill it in for a while.

It’s for a car that looks fine in the shade and covered in swirls in the sun, and for anyone about to put on a coating or film. Even expensive cars rarely leave the dealer with the paint in great shape, and bad washes and automatic car washes make it worse.

This page explains what correction does, how far it can go, and how we do it.

Removes, doesn’t hide

The defects come out of the clear coat, so they don’t come back when the product wears off.

Measured first

We check clear coat thickness with an electronic paint depth gauge on every panel before polishing.

The right base

Coatings and film lock in what’s under them. Correct the paint first and that’s what you keep.

What it actually does

Car paint has three layers: primer, color coat and clear coat. Most of what you see as swirls and scratches sits in the clear coat, the top layer. Correction takes a tiny amount off the top until the surface is level with the bottom of the marks. Light then reflects evenly and the gloss comes back.

Cross-section of car paint before and after correction. Before, scratches cut into the top of the clear coat. After, the clear coat is level and slightly thinner. Before: scratches in the clear coatAfter: leveled clear coat Clear coatColor coatPrimerClear coatColor coatPrimer Where the surface used to be

Correction has limits

There’s only so much clear coat to work with, which is why we measure it first. A scratch that goes through the clear coat can’t be polished out. That’s a paint repair, and we’ll tell you if that’s what you’re looking at. See our collision repair page.

Correction vs. wax or glaze

Here’s the difference between fixing the surface and covering it.

 Wax or glazePaint correction
What it doesFills in and covers marksLevels the clear coat to remove marks
When it wears offThe marks come backThe removed marks stay gone
Work involvedQuickSlow, hands-on machine work
Adds protection?Some, for a short timeNo. Add a coating or film afterward

Two levels of correction

What your car needs depends on its condition and what you want from it.

Single-stage enhancement

One polishing step.

  • Removes light wash marring
  • Brings up the gloss
  • Preps the surface for a ceramic coating
  • A good fit for new cars

Multi-stage correction

A heavy compounding step, then a refining polish.

  • Removes deep swirl marks
  • Takes out light to medium scratches
  • Handles water spot etching and heavy oxidation
  • For neglected paint

How we do it

How long it takes depends on the car and the condition of the paint. The steps are the same.

  1. Look at the paint

    We go over the car with you and talk through what you want from it.

  2. Wash and decontaminate

    Hand wash, chemical iron decontamination and clay bar. That takes off embedded brake dust, industrial fallout and road tar before a pad touches the paint.

  3. Measure

    An electronic paint depth gauge on every panel, so we know how much clear coat there is to work with.

  4. Compound and polish

    Dual-action polishers, cutting compounds and fine finishing polishes, matched to the damage.

  5. Protect it

    Fresh paint is exposed paint. This is the time to add a coating or film.

In the shop

Real photos from our shop.

Gloved hands running a machine polisher across the hood of a dark car in the Enthusiast Auto Works shop
A machine polisher working the hood of a dark car.
Technician in a hood, respirator mask and gloves polishing the front fender of a dark car
Polishing a front fender, with mask and gloves on.

Doing it before a coating or PPF

If you’re putting money into long-term protection, do the prep first. A coating or film over swirled paint locks those flaws in and can make them easier to see.

Before ceramic coating

Gloss comes from what’s under the coating. See our XPEL ceramic coating page.

Before PPF

Film sits on the paint for years, so start with paint you like. See our XPEL paint protection film page.

Why have us do it

  • We measure every panel before we polish.
  • Correction, ceramic coating and PPF all happen here, so the car doesn’t have to move between shops.
  • Pickup and delivery is available. It’s free locally, out to about Greenwich, CT. Farther out it may cost extra.

We’re a certified collision repair shop for Rivian, Jaguar Land Rover, Genesis, Infiniti, Nissan, Kia and Stellantis, and an XPEL Certified Installer. Those credentials cover collision repair and film. See our Jaguar Land Rover and Rivian pages.

Tell us about your car

Let us know the car, what you’re seeing on the paint, and whether you plan to coat or film it.

Request an Estimate

Tell us about the car and what you'd like done. We call back the same day. On a busy day, by the next morning at the latest.

JPG, PNG, HEIC or WebP, up to 10 MB each. Phone photos are fine.

We never share your details. Prefer to talk? Call (914) 630-1668.

Common questions

What is paint correction?

It’s machine polishing that levels the clear coat to remove swirl marks, wash scratches, holograms and oxidation.

Will it remove every scratch?

No. Marks in the clear coat can usually come out. A scratch that goes through the clear coat needs a paint repair.

Does it thin the clear coat?

Yes, by a small amount. That’s why we measure each panel with a paint depth gauge first.

Is it different from a polish or wax?

Yes. Wax and glaze fill in marks for a while. Correction removes them from the clear coat.

Does a new car need it?

Often a light one. New cars can have wash marring from the dealer, and a single-stage enhancement takes care of it and preps the paint for a coating.

Should I correct the paint before a coating or PPF?

Yes, if the paint needs it. Both lock in what’s underneath.

How long will the results last?

The marks we remove stay gone, but new ones can come from bad washes. A coating or film and good wash habits help.

How long does it take and what does it cost?

It depends on the car and the condition of the paint. Call us with the year, make and model.

Where we work

Our shop is in New Rochelle. Customers come to us from:

Westchester

Scarsdale, Rye, Larchmont, Mamaroneck, Harrison, Bronxville, Pelham, White Plains, Armonk, Chappaqua, Bedford and Mount Kisco.

Fairfield County, CT

Greenwich, Stamford, Darien and New Canaan.

Manhattan

Pickup and delivery is available. Ask us what it costs from your address.

Enthusiast Auto Works

55B Plain Ave, New Rochelle, NY 10801
Open Monday to Friday
(914) 630-1668 · Contact us

Call 914-630-1668