Caliper Painting

Custom brake caliper painting gives your calipers a new color, or brings back a tired factory finish. It’s a small job, but you see it every time you walk up to the car.

It’s for owners who want to match the body color, add some contrast behind open wheels, or clean up calipers that have faded. Big brakes behind open spokes show it the most.

We take the calipers off the car to do this. This page explains what that involves, what your choices are, and why a quick spray rarely lasts.

Almost any color

We can mix nearly any color, or match the OEM paint code on your car.

Logos if you want them

We can recreate a factory logo or make custom script, then seal it under clear.

Made for brake heat

High-temperature paint and clear coat, because calipers live in heat, brake dust and road debris.

What you can choose

Most jobs start with one of these four goals. Tell us what you want the car to look like and we’ll work out the rest.

GoalWhat we do
Match the bodyMix the color to your car’s OEM paint code.
Add contrastUse a performance color like Ferrari Rosso Corsa, Porsche Acid Green or Lamborghini Giallo Orion, or a subtle color on something like a Range Rover.
Refresh the factory lookStrip the faded finish and repaint it, such as on an AMG with tired calipers.
Add a logoRecreate factory lettering such as Brembo, AMG, M Performance or Porsche, or design custom script for your build.

Quick spray vs. a full caliper job

Calipers see big temperature spikes, corrosive brake dust and road debris. Paint that isn’t made for that, or isn’t on a clean surface, can chip, peel and discolor.

 Quick spray on the carHow we do it
CaliperLeft on the carRemoved and disassembled
PrepLight cleaningStripped of old paint and corrosion, then degreased
PaintWhatever is on the shelfHigh-temperature primer and base coat
LogoUsually noneDecal sealed under clear
Top coatOften noneHigh-temperature, chemical-resistant clear coat

The honest downside

This takes more time and costs more than spraying them on the car, because the calipers have to come off. If you only want a quick color change for a season, this may be more than you need.

In the shop

Photos from our shop, from the bench to the finished job.

Hands taking apart gray brake calipers on a towel on a workbench
Calipers being taken apart on the bench before any paint goes on.
Red brake caliper hanging from a hook while a spray gun applies paint
A caliper hung up and sprayed, so the color reaches every side.
Finished yellow brake calipers with a Porsche logo on a shop bench
Finished yellow calipers with a Porsche logo.
Red brake caliper behind a black Porsche wheel
A red caliper behind a black Porsche wheel.

How the job works

How long it takes depends on the car. The steps are the same.

  1. Pick the color and logo

    Tell us the car and what you want. We settle on the color, the finish and any lettering.

  2. Remove and disassemble

    The calipers come off the car and get taken apart, so seals and plastics aren’t damaged.

  3. Strip and clean

    Old paint, corrosion and embedded brake dust come off. The surface gets degreased and sanded so the paint can grip.

  4. Mask

    Anything that shouldn’t get paint is masked off.

  5. Primer and color

    High-temperature primer and automotive base coat go on.

  6. Logo and clear

    The decal goes on, then high-temperature clear coat seals it in.

  7. Back on the car

    The calipers go back on and the car is ready for you.

Pair it with ceramic coating

Brake dust is hot when it lands, and it wants to stick. XPEL FUSION PLUS ceramic coating over freshly painted calipers and wheels makes it harder for dust to bond, so they’re easier to rinse clean. It’s optional.

Having the wheels done too? Calipers and wheel powder coating make sense in the same visit, since the wheels are off anyway.

Why have a collision shop do it

  • Paint work and careful disassembly are everyday jobs here.
  • You can do it all in one visit: XPEL paint protection film, ceramic coating or window tint.
  • We primarily work on BMW and above, but we accept all cars.
  • Pickup and delivery is available. It’s free locally, out to about Greenwich, CT. Farther out it may cost extra.

We’re a certified collision repair shop for Rivian, Jaguar Land Rover, Genesis, Infiniti, Nissan, Kia and Stellantis, and an XPEL Certified Installer. Those credentials cover collision repair and film. See our Jaguar Land Rover and Rivian pages.

Tell us about your car

Let us know the car and the color you have in mind. In the form, mention that it’s for caliper painting.

Request an Estimate

Tell us about the car and what you'd like done. We call back the same day. On a busy day, by the next morning at the latest.

JPG, PNG, HEIC or WebP, up to 10 MB each. Phone photos are fine.

We never share your details. Prefer to talk? Call (914) 630-1668.

Common questions

Do you take the calipers off the car?

Yes. They come off and get disassembled so we can strip them properly and avoid damaging seals or plastics.

What colors can I choose?

Nearly any color. We can match your car’s OEM paint code or mix a performance color like Rosso Corsa, Acid Green or Giallo Orion.

Can you add a logo?

Yes. We can recreate factory lettering such as Brembo, AMG, M Performance or Porsche, or make custom script. It gets sealed under the clear coat.

Will the paint hold up to brake heat?

We use high-temperature paint and clear coat made for this job. Prep matters as much as the paint, which is why the calipers get stripped first.

How long does caliper painting take?

It depends on the car. We’ll give you a time when we quote the job.

How much does it cost?

It depends on the car, the color and whether you want logos. Send us the details and we’ll give you an estimate.

Should I ceramic coat painted calipers?

It’s optional, but it helps. Ceramic coating makes it harder for hot brake dust to stick, so the calipers are easier to clean.

Will painting calipers affect my car’s warranty?

We can’t answer that for every car. Check your warranty terms or ask your dealer before you book.

Where we work

Our shop is in New Rochelle. Customers come to us from:

Westchester

Scarsdale, Rye, Larchmont, Mamaroneck, Harrison, Bronxville, Pelham, White Plains, Armonk, Chappaqua, Bedford and Mount Kisco.

Fairfield County, CT

Greenwich, Stamford, Darien and New Canaan.

Manhattan

Pickup and delivery is available. Ask us what it costs from your address.

Enthusiast Auto Works

55B Plain Ave, New Rochelle, NY 10801
Open Monday to Friday
(914) 630-1668 · Contact us

Call 914-630-1668